Can You Take Section 179 on Used Equipment and When Does It Apply?

‍Yes, you can take Section 179 on used equipment, provided the equipment is new to your business, acquired by purchase from an unrelated party, used more than 50% of the time for business, and placed in service during the tax year you claim it. The age of the asset has no bearing on eligibility. A ten-year-old CNC machine bought from an unrelated seller receives the same treatment as a machine delivered from the factory. For tax years beginning in 2026, the Section 179 deduction limit is $2,560,000, with the dollar-for-dollar phase-out beginning at $4,090,000 of total qualifying property placed in service and reaching zero at $6,650,000, per Revenue Procedure 2025-32. A separate ceiling sits underneath those figures: the deduction cannot exceed the business's taxable income from active trades or businesses, and the disallowed portion carries forward indefinitely.

The sections below cover what "new to you" means as a statutory test rather than a slogan, whether equipment you already owned personally can qualify, which family members actually count as related parties, which asset categories are eligible, when the deduction applies and what placed in service means, the 2026 dollar and income limits, a worked calculation from purchase price to final deduction, how Section 179 differs from regular depreciation, whether used equipment also qualifies for bonus depreciation, how the two provisions stack and which to lead with, how financed and leased equipment is treated, whether auction purchases qualify, how LLCs and other pass-throughs claim the deduction, and how the election is reported on Form 4562.

Key Takeaways

• Used equipment qualifies for Section 179 on identical terms to new equipment. The only difference the statute recognizes is whether the property is new to your business.
• "New to you" is shorthand for three separate statutory tests: the property must be acquired by purchase, not acquired from a related party, and not previously used by the taxpayer.
• Equipment you already owned personally and later converted to business use does not qualify, because it was not acquired by purchase for use in a trade or business.
• Siblings are not related parties for Section 179 purposes. IRC Section 179(d)(2) narrows the family definition to spouse, ancestors, and lineal descendants, which makes a purchase from a brother or sister eligible where a purchase from a parent or child is not.
• The 2026 deduction limit is $2,560,000, with the phase-out running from $4,090,000 to $6,650,000 of total qualifying property placed in service.
• Section 179 cannot exceed taxable business income and cannot create a net operating loss. Bonus depreciation has neither constraint.
• Used equipment has qualified for bonus depreciation since the Tax Cuts and Jobs Act removed the original-use requirement for property acquired after September 27, 2017.
• Electing less than the full amount of Section 179 and letting 100% bonus depreciation absorb the remainder often produces a larger first-year deduction than a maximum election.
• Financed purchases qualify in full in the first year. Operating leases do not, because the lessee holds no depreciable basis.

Can You Take Section 179 on Used Equipment?

You can take Section 179 on used equipment under the same rules that govern new equipment, because IRC Section 179(d)(1) conditions the deduction on how the property is acquired and used rather than on how old it is. The statute describes qualifying property as tangible property that is Section 1245 property, acquired by purchase for use in the active conduct of a trade or business. Nothing in that definition references the manufacture date, the original owner, or the condition of the asset.

Acquisition and use are the two axes that actually control the answer. The acquisition side asks whether the property was purchased, whether the seller was an unrelated party, and whether the buyer had used the property before. The use side asks whether business use exceeds 50% and whether the property entered service during the tax year. Used equipment that clears all five of those tests is fully eligible, and used equipment that fails any one of them is not, regardless of price or condition.

The practical significance is largest for businesses buying capacity rather than novelty. A second commercial oven, a used excavator, a refurbished server rack, and a pre-owned dental chair all produce the same first-year deduction that new versions would, at a fraction of the outlay. Sequencing those purchases against the year's income rather than against the vendor's promotion calendar is the part of tax planning that turns a good price into a good tax result.

What Does "New to You" Actually Mean?

"New to you" means the property was acquired by purchase, was not acquired from a related party, and had not previously been used by the taxpayer, which are three separate tests packed into one phrase. Each test comes from a different clause of IRC Section 179(d)(2), and a purchase can satisfy two of them and still fail the third. Treating the phrase as a single idea is how buyers end up surprised.

The acquisition-by-purchase test excludes property received by gift and property received by inheritance under IRC Section 179(d)(2)(B) and (C). Equipment left to a business owner by a parent's estate carries a stepped-up basis and depreciates normally, but it cannot be expensed under Section 179, because no purchase occurred. The same logic reaches property received in a contribution to capital and property whose basis is determined by reference to the transferor's basis.

The prior-use test and the related-party test each get their own treatment below, since both are where real transactions fail. What holds across all three is that the seller's history with the asset is irrelevant. A machine that ran in three prior shops over fifteen years is new to your business the moment you buy it from an unrelated party, and its accumulated depreciation on someone else's books has no effect on your deduction.

Can You Take Section 179 on Equipment You Already Owned Personally?

You cannot take Section 179 on equipment you already owned personally and later converted to business use, because the property was not acquired by purchase for use in the active conduct of a trade or business. The acquisition and the business purpose have to coincide. Buying a camera for personal photography in 2024 and starting a photography business with it in 2026 fails the test, no matter how exclusively the camera is used for the business afterward.

Converted property is not left without any deduction. It enters service at the lower of adjusted basis or fair market value on the conversion date, and it depreciates over its remaining MACRS recovery period on a normal schedule. The owner simply loses the acceleration that Section 179 and bonus depreciation would have provided on a purchase. Documenting the fair market value at the conversion date, through comparable sale listings or a written appraisal, is what supports the depreciable basis if it is ever questioned.

Can You Buy Equipment From a Family Member and Take Section 179?

You can buy equipment from some family members and claim Section 179, and you cannot from others, because IRC Section 179(d)(2) applies a narrower definition of family than the rest of the tax code uses. The general related-party rules in IRC Section 267 treat brothers and sisters as related parties. Section 179 does not. The flush language of Section 179(d)(2) directs that Section 267(c)(4) be applied as if an individual's family included only a spouse, ancestors, and lineal descendants.

That narrowing produces a result most buyers get backward. A purchase from a parent, grandparent, child, grandchild, or spouse is excluded. A purchase from a brother or sister is not excluded on family grounds, and the equipment can qualify if the transaction is otherwise a genuine arm's-length purchase. Controlled entities remain excluded under the Section 267(b) and Section 707(b) relationships regardless of who owns them, so buying equipment from a second company you control fails even though no family member is involved.

Arm's length is doing real work in that sentence. A sibling sale documented with a written bill of sale, a fair market value supported by comparable listings, and an actual transfer of funds looks entirely different from a nominal transfer at a convenient price. Family transactions also intersect with entity structure in ways that are easier to arrange correctly at the point of business formation than to defend afterward.

What Assets Does Section 179 Apply To?

Section 179 applies to tangible personal property used in a trade or business, off-the-shelf computer software, and certain improvements to nonresidential buildings, in each case whether the property is new or used. The qualifying categories cover most of what a business buys that is not real estate or inventory:

• Machinery and production equipment. Manufacturing lines, CNC machines, presses, compressors, and industrial tools.
• Heavy and specialized equipment. Construction, agricultural, mining, and material-handling machinery, including trailers and towable equipment.
• Office furniture and equipment. Desks, seating, filing systems, printers, copiers, and phone systems.
• Computers and peripherals. Workstations, laptops, servers, monitors, and network hardware.
• Off-the-shelf software. Software available to the general public under a nonexclusive license, purchased rather than subscribed.
• Restaurant and commercial kitchen equipment. Ranges, refrigeration, dishwashing systems, and prep equipment.
• Qualified improvement property and building systems. Interior improvements to nonresidential buildings, plus roofs, HVAC, fire protection, alarm, and security systems under the IRC Section 179(f) carve-out.

The exclusions are narrower than they look and mostly concern what the property is rather than how old it is. Inventory held for resale does not qualify, since it is not depreciable. Intangibles such as patents, trademarks, and customer lists are amortized under different provisions. Buildings and their structural components are excluded outside the 179(f) carve-outs, and land improvements such as parking lots, fences, and landscaping fall outside Section 179 entirely while still qualifying for bonus depreciation. Property used predominantly outside the United States is excluded under IRC Section 50(b)(1).

Can You Take Section 179 on Used Vehicles?

You can take Section 179 on used vehicles under the same new-to-you standard that applies to equipment, subject to an additional layer of weight-based caps that equipment does not face. A used vehicle rated at or below 6,000 pounds gross vehicle weight is a passenger automobile subject to the Section 280F ceilings. A used passenger SUV rated between 6,001 and 14,000 pounds carries a $32,000 Section 179 cap for 2026. Heavy non-SUV vehicles face no model-specific cap at all.

Vehicles also carry stricter substantiation, since IRC Section 280F(d)(4) classifies them as listed property and requires a contemporaneous mileage log rather than a year-end estimate. The full weight tiers, caps, and recapture rules for business vehicles run deeper than this page covers, and the rest of this discussion stays with equipment.

When Can You Take the Section 179 Deduction?

You can take the Section 179 deduction in the tax year the equipment is placed in service, which means the equipment must be delivered, installed, and ready for its intended business use on or before the last day of that tax year. For a calendar-year business, the deadline is December 31. Ordering, paying, financing, and taking delivery are each necessary steps toward that date, and none of them is sufficient on its own.

Ready and available for use is the operative standard from IRS Publication 946, and it turns on functional readiness rather than on actual operation. A commercial mixer delivered on December 20, uncrated, wired in, and ready to run is placed in service on December 20 even if the first batch is mixed in January. The same mixer sitting on a pallet awaiting an electrician is not placed in service until the electrician finishes, and that distinction has moved entire deductions into the following year for businesses that built no installation buffer into a year-end purchase.

What If You Buy Equipment in December but Use It in January?

Equipment bought in December but not ready for use until January is deducted in the following tax year, because the placed-in-service date controls the deduction rather than the purchase date or the payment date. The invoice date is irrelevant. A fully paid, fully delivered machine that still needs assembly, calibration, permitting, or utility connection on December 31 belongs to the next year's return.

Installation lead time is the variable worth building into a purchase decision. Hood systems need permits. Three-phase equipment needs an electrician. Large machinery needs rigging and sometimes a floor inspection. We work through this timing with restaurant accounting clients in Miami almost every December, because a used walk-in cooler that arrives on the 28th and gets connected on January 4 produces a deduction a full year later than the owner planned. Ordering in October rather than mid-December is usually the cheaper fix.

What Are the 2026 Section 179 Limits?

The 2026 Section 179 limits are a $2,560,000 maximum deduction and a phase-out that begins at $4,090,000 of total qualifying property placed in service during the year, eliminating the deduction entirely at $6,650,000. Those figures come from the inflation adjustment in Revenue Procedure 2025-32, applied to the permanent baseline the One Big Beautiful Bill Act established when it raised the limit from $1,000,000 to $2,500,000 effective for tax years beginning after December 31, 2024.

The phase-out reduces the ceiling dollar for dollar rather than by percentage, and it is measured against total qualifying property placed in service rather than against the amount elected. A business placing $4,500,000 of qualifying property in service in 2026 exceeds the threshold by $410,000, which drops its ceiling from $2,560,000 to $2,150,000. The same business could elect far less than that and still face the reduced ceiling, because the trigger is spending rather than election size.

Used equipment counts toward the spending threshold at its purchase price, not at its original cost when new. A business buying $900,000 of used machinery that cost $2,400,000 new adds $900,000 to its phase-out calculation. That is one of the quieter advantages of buying used for capital-intensive operations: the same production capacity consumes far less of the phase-out headroom.

What Is the Business Income Limit for Section 179?

The business income limit caps the Section 179 deduction at the taxpayer's aggregate taxable income from the active conduct of any trade or business, and the amount disallowed by that cap carries forward indefinitely under IRC Section 179(b)(3). Section 179 cannot create a net operating loss or deepen an existing one. It can reduce taxable business income to zero and no further.

Business income for this test is broader than the net profit of the single activity that bought the equipment. It includes wages earned by the taxpayer, net income from other active businesses, and, on a joint return, the spouse's earned income. A consultant with $50,000 of net business profit and $140,000 of W-2 wages has $190,000 of business income available, which is a figure that frequently changes the answer for owners who assumed the equipment purchase could not be expensed.

The carryforward has no expiration and is not reduced over time, though it does sit idle until a profitable year absorbs it. A deduction deferred three years into the future is worth less in present-value terms than the same deduction taken now, and it may be worth more if the business expects a higher marginal rate later. Modeling that tradeoff across the next several years before the election is set is standard Virtual CFO work whenever a client is planning a significant equipment year.

How Do You Calculate the Section 179 Deduction?

You calculate the Section 179 deduction by applying the business-use percentage to the purchase price, testing the result against the annual dollar limit and the spending phase-out, then against the business income limitation, and finally applying bonus depreciation to any basis that remains. The order matters, because each ceiling is measured against the figure the previous step produced. A worked example makes the sequence concrete. Assume a $180,000 used production line purchased and placed in service in 2026, used 90% for business, in a company with $120,000 of taxable business income and no other capital purchases that year.

1. Apply the business-use percentage to the purchase price. The $180,000 cost multiplied by 90% produces a $162,000 depreciable basis. The remaining $18,000 is personal and never enters the calculation.
2. Test against the annual dollar limit. The 2026 ceiling of $2,560,000 far exceeds $162,000, so the dollar limit imposes no reduction.
3. Test against the spending phase-out. Total qualifying property placed in service is $180,000, well below the $4,090,000 threshold, so the ceiling is not reduced.
4. Test against taxable business income. Only $120,000 of business income is available, which caps the usable Section 179 deduction at $120,000 for the year.
5. Elect Section 179 up to the income limit rather than up to the basis. Electing $120,000 keeps the entire deduction usable this year and leaves $42,000 of basis intact.
6. Apply 100% bonus depreciation to the remaining basis. The $42,000 balance is deducted in full under IRC Section 168(k), which carries no dollar cap and no income limitation.
7. Total the first-year deduction. The $120,000 Section 179 election plus $42,000 of bonus depreciation produces the full $162,000 in year one, with no carryforward to track.

Step five is where most calculations go wrong. Electing the full $162,000 would have produced a $120,000 current deduction and a $42,000 carryforward waiting on a future profitable year, because the basis reduction follows the amount elected rather than the amount allowed. The partial election reaches the same total deduction a year or more sooner. Recording the election amount and the resulting basis correctly in the fixed asset schedule behind the year-end financial statements is what keeps the two figures from drifting apart in later years.

What Is the Difference Between Section 179 and Depreciation?

The difference between Section 179 and depreciation is timing and election: Section 179 expenses the cost in the year the property is placed in service by affirmative election, while regular MACRS depreciation recovers the same cost automatically across the property's assigned recovery period. Both recover the identical total amount. They differ on when the deduction lands and on how much control the taxpayer has over it.

AttributeSection 179Regular MACRS DepreciationTiming of deductionEntire amount in the placed-in-service yearSpread across 5, 7, 15, or more yearsElection requiredYes, on Part I of Form 4562No, applies by default2026 dollar cap$2,560,000NoneSpending phase-outBegins at $4,090,000; zero at $6,650,000NoneBusiness income limitationYes, cannot exceed active business incomeNoCan create a net operating lossNoYesUsed property eligibleYes, if new to the businessYesPer-asset flexibilityElected asset by asset, partial amounts permittedApplied uniformly by asset classState conformityBroad, though several states cap the amountUniversal

Per-asset flexibility is the attribute that makes Section 179 a planning instrument rather than a formula. The election can be made on one machine and skipped on another, and it can be made for part of a single asset's basis. That surgical control is what allows a business to land taxable income on a chosen figure instead of accepting whatever the default schedules produce, and it is the reason the election belongs in a tax strategy discussion held in November rather than a data-entry decision made in April.

Does Used Equipment Qualify for Bonus Depreciation?

Used equipment qualifies for 100% bonus depreciation as long as it is new to the taxpayer and acquired from an unrelated party, which has been the rule since the Tax Cuts and Jobs Act removed the original-use requirement for property acquired after September 27, 2017. Before that change, bonus depreciation reached only property whose original use began with the taxpayer, which excluded used equipment entirely. The expansion is what gives used-equipment buyers two accelerators instead of one.

The One Big Beautiful Bill Act then made the 100% rate permanent for qualifying property acquired after January 19, 2025, replacing a phase-down schedule that had reduced the rate to 60% in 2024 and would have dropped it to 20% in 2026. Bonus depreciation carries no dollar cap, no spending phase-out, and no business income limitation, and it can create or deepen a net operating loss. It applies automatically unless the taxpayer elects out, and the election out covers an entire MACRS asset class for the year rather than a single asset.

The same two provisions govern equipment placed into a rental property, where the asset mix often spans several recovery periods at once. What changes across contexts is not the eligibility of used property but which provision produces the better result given the year's income.

Can You Take Both Bonus Depreciation and Section 179?

You can take both provisions on the same equipment purchase, applied in a fixed order: Section 179 first, bonus depreciation on the basis that remains, and regular MACRS depreciation on anything still left. IRS Publication 946 prescribes that sequence, and it is not optional. The two provisions cover different dollars rather than the same dollars twice.

Stacking matters most when one ceiling binds and the other does not. A business at the Section 179 spending phase-out uses bonus depreciation to reach a full write-off that Section 179 alone cannot deliver. A business with thin income elects a smaller Section 179 amount and lets bonus depreciation carry the rest, as the worked calculation above demonstrates. The order stays the same in every case, and only the split between the two changes.

Is It Better to Take Section 179 or Special Depreciation?

Section 179 produces the better result when the state does not conform to federal bonus depreciation or when the business wants asset-level control over the deduction, and the special depreciation allowance produces the better result when income is too thin to absorb an election or when a net operating loss is useful. The answer changes by state, by year, and sometimes by asset within the same purchase.

State conformity is the most concrete variable. California, New York, New Jersey, Massachusetts, Rhode Island, and New Hampshire do not conform to federal bonus depreciation, according to a Withum analysis of state responses to the One Big Beautiful Bill Act, while Section 179 conformity is far broader even where states cap the amount. A business filing in one of those states can leave real state-level deduction on the table by favoring bonus. Florida imposes no personal income tax, which removes the question entirely for an individual owner filing there, and a business operating across several states runs the comparison separately for each one.

One acquisition method removes the choice. Property acquired with floor plan financing, the revolving inventory credit line used by dealerships, is denied bonus depreciation under IRS Publication 946. Section 179 remains available on that property, which makes the election the only route to a first-year deduction for a buyer whose lender uses that structure.

Can You Take Section 179 on Financed or Leased Equipment?

You can take Section 179 on financed equipment for the full purchase price in the first year regardless of how little has been paid down, and you cannot take it on equipment held under an operating lease because the lessee holds no depreciable basis. The deduction attaches to the cost of property the taxpayer owns for tax purposes, not to cash outlay during the year.

Capital leases sit with purchases rather than with rentals. A lease structured so the lessee is treated as the tax owner, typically through a bargain purchase option or a term covering most of the asset's useful life, supports a Section 179 election on the full capitalized cost. An operating lease produces a deductible rent expense under IRC Section 162 instead, spread across the lease term. The two structures can look similar in a financing proposal and produce entirely different returns, which is why the lease documents belong in the business consulting review before signing rather than after.

Financing a used purchase creates a timing advantage worth naming. A business can place $200,000 of used equipment in service in December, deduct the qualifying amount on that year's return, and pay for the equipment over the following five years. The deduction lands immediately and the cash leaves gradually, which is the strongest cash-flow case for the provision and the reason equipment lenders promote it so heavily.

Does Equipment Bought at Auction Qualify?

Equipment bought at auction qualifies for Section 179 on the same terms as a dealer purchase, since an auction is an arm's-length acquisition by purchase from an unrelated party. The winning bid plus the buyer's premium and applicable taxes forms the depreciable basis, and transportation, rigging, and installation costs are capitalized into that basis as well rather than deducted separately.

Documentation carries more weight in auction and private-party purchases than in dealer transactions, because no invoice trail exists by default. The file should hold the auction house settlement statement or a written bill of sale, proof of payment, the delivery date, and the date the equipment became ready for use. A private-party purchase should also carry some evidence that the price reflected fair market value, such as comparable listings captured at the time, which matters most when the seller is an acquaintance and the price is unusually favorable.

Can an LLC Take a Section 179 Deduction?

An LLC can take a Section 179 deduction, and how the limit applies depends on the LLC's tax classification rather than on its legal form. A single-member LLC treated as a disregarded entity reports the deduction on Schedule C and applies the limit once, at the owner level. A multi-member LLC taxed as a partnership applies the limit twice, and so does an LLC or corporation taxed as an S corporation.

The double limitation in IRC Section 179(d)(8) is what catches owners of multiple entities. The entity applies the $2,560,000 ceiling and the business income limitation at its own level, allocates the deduction to members on Schedule K-1, and each member then applies the same ceiling again across every source on the personal return. An owner holding interests in four entities that each allocate $800,000 receives $3,200,000 of allocated Section 179 and can personally deduct no more than $2,560,000 in 2026.

Entity-level income limits create a second trap for pass-throughs. A partnership with a loss for the year cannot pass through any Section 179 deduction at all, even to partners with substantial outside income, because the entity's own business income caps the allocation before it reaches the K-1. Bonus depreciation flows through without that entity-level income test, which often makes it the better provision for startup and tech entities in their early loss years.

How Do You Claim Section 179 on Form 4562?

You claim Section 179 by completing Part I of Form 4562, Depreciation and Amortization, and attaching it to a timely filed return for the year the equipment was placed in service. Line 1 carries the maximum dollar limit of $2,560,000 for 2026, line 2 carries the total cost of Section 179 property placed in service, line 3 carries the $4,090,000 threshold, and lines 4 and 5 produce the reduced ceiling after any phase-out.

Line 6 is where the individual assets are listed, each with a description, its total cost, and the specific amount elected, which can be any figure from zero up to the full cost. Line 11 applies the business income limitation, and line 13 carries any disallowed amount forward to the following year. Keeping the elected amounts at the asset level rather than as a single pooled figure is what makes a later disposition, a later business-use change, or a state adjustment computable without reconstructing the year from invoices.

The election is also reversible. Treasury Regulation Section 1.179-5(c) permits a Section 179 election to be revoked on an amended return filed within the period for that tax year, without IRS consent, though the revocation itself is irrevocable once made. A business that elected too aggressively and then saw its income picture change has that route available, which is one more reason a proactive tax planning review in the fourth quarter costs less than a correction the following spring.

Frequently Asked Questions

Is Equipment a 100% Write Off?

Equipment is a 100% write-off in the first year when the business has enough taxable income to absorb a Section 179 election, or when bonus depreciation covers whatever the election cannot reach. Bonus depreciation carries no dollar cap and no income limitation, so the combination produces a full first-year deduction on qualifying equipment in almost every case. The exceptions are property acquired with floor plan financing and property in states that decoupled from the federal rules.

Does Section 179 Apply to Used Equipment Bought From a Company You Also Own?

Section 179 does not apply to equipment bought from a company you also own, because controlled entities are related parties under IRC Section 267(b) and Section 707(b), which Section 179(d)(2)(A) incorporates by reference. The exclusion holds even when fair market value is paid and the transaction is fully documented. Moving equipment between entities under common control is a transfer of basis rather than a purchase that resets it.

Can You Take Section 179 on Refurbished or Reconditioned Equipment?

Refurbished and reconditioned equipment qualifies for Section 179 on the same terms as any other used property, since the statute cares about how the property was acquired rather than about its condition. The purchase price forms the depreciable basis, and refurbishment costs paid by the seller are already embedded in that price. Refurbishment the buyer pays for after acquisition is capitalized into the equipment's basis rather than deducted as a repair.

Does Software Qualify for Section 179 If It Is Not New?

Off-the-shelf software qualifies for Section 179 whether or not the copy is new, provided it is available to the general public under a nonexclusive license, has not been substantially modified, and is purchased rather than subscribed. Software-as-a-service subscriptions are treated as services rather than as purchased property, which puts them outside Section 179 and into ordinary deductible business expense.

Can You Take Section 179 on Used Equipment in Your First Year of Business?

You can take Section 179 on used equipment in your first year of business, subject to the same taxable income limitation that applies in any other year. A first-year business with minimal income will often find the election capped well below the equipment's cost, which is where bonus depreciation becomes the better lead since it can create a net operating loss that carries forward. Startup advisory work usually models both paths before the first return is filed.

What Records Should You Keep for a Used Equipment Purchase?

The records to keep for a used equipment purchase are the bill of sale or invoice, proof of payment, the financing or lease agreement, the delivery date, the date the equipment became ready for its intended use, and any installation or transportation invoices capitalized into basis. Equipment with both business and personal use needs a usage log as well. These records establish the two dates and the one number that the entire deduction depends on.

The Bottom Line

Used equipment is fully eligible for Section 179, and the questions that actually decide a given purchase have nothing to do with the equipment's age. They are whether the seller was a related party under the narrower family definition Section 179 applies, whether the property was acquired by purchase rather than converted from personal use, whether it was ready for its intended business use before the year closed, and whether the business has enough taxable income to absorb an election. The 2026 ceilings of $2,560,000 and $4,090,000 rarely bind a small or mid-sized business. The income limitation and the placed-in-service date almost always do.

The planning work sits in two places. Ordering early enough that installation finishes before December 31 protects the year the deduction lands in, and electing Section 179 only up to available income while letting bonus depreciation absorb the remainder protects the amount. Both decisions are made once, and both are far cheaper to get right in the fourth quarter than to correct on an amended return. If you are planning an equipment purchase and want the election modeled against your projected income before you commit, the advisors at NR CPAs & Business Advisors are glad to run it with you, and you can reach us at +1 954-231-6613.

‍